Chengdu Ebyte Electronic Technology Co,;Ltd
E70-433T14S user manual
Copyright ©2012–2019
，
Chengdu Ebyte Electronic Technology Co,;Ltd
17
7.1 Default Parameter
Default parameter values
：
C0 00 00 18 44 1C
Model
Frequency
Address
Channel
Air data rate
Baud rate
Parity
Transmitting
power
E70-868T14S
868MHz
0x0000
0x0E
2.5K
9600
8N1
25mW
7.2 Reading Operating Parameters
Instruction format
Description
C1+C1+C1
In configuration mode
（
M0=1, M1=1, M2=0
），
User gives the module instruction (HEX format): C1 C1 C1,
Module returns the present configuration parameters.
For example, C0 00 00 18 4E 1C.
7.3 Reading Version Number
Instruction format
Description
C3+C3+C3
In configuration mode
（
M0=1, M1=1, M2=0
）
,
User gives the module instruction (HEX format): C3 C3 C3,
Module returns its present version number, for example C3 0071 XX1 XX2 XX3 XX4 XX5.
70 here means the module model (E70 series); xx1 is the version number and XX2 XX3 XX4 XX5
refers to the other module features.
7.4 Reset Instruction
Instruction format
Description
C4+C4+C4
In configuration mode
（
M0=1, M1=1, M2=0
）
,
User gives the module instruction (HEX format): C4 C4 C4, the module resets for one time. During the reset
process, the module will conduct self-check, AUX outputs low level. After reset completed, the AUX outputs
high level, then the module starts to work regularly when the working mode can be switched or be given
another instruction.
7.5 Parameter Setting Instruction
No.
Item
Description
Notes
0
HEAD
Fix 0xC0 or 0xC2, it means this frame data is control command
Must be 0xC0 or 0xC2
C0: Save the parameters when power-down
C2: Do not save the parameters when power-down
1
ADDH
High address byte of module
（
the default 00H
）
00H-FFH
2
ADDL
Low address byte of module
（
the default 00H
）
00H-FFH
3
SPED
7
6
UART parity bit
UART mode can be different between
communication parties
0
0
8N1
（
Default
）
