background image

Chengdu Ebyte Electronic Technology Co,;Ltd

E62-DTU (433D30)user manual

Copyright ©2012–2019

Chengdu Ebyte Electronic Technology Co,;Ltd

2

1.Introduction

1.1.

Brief Introduction

E62-DTU (433D30) is a full duplex wireless data transmission module for point-to-point transmission( Has both

RS232 and RS485), transmission power is 100mW, transparent transmission mode, working in 433MHz band.

Module has the function of frequency hopping spread spectrum (FHSS), in the process of digital transceiver module

both sides according to the frequency hopping algorithm automatically synchronous jump in as many as 50 frequency
points (user customizable FM and sequence number), and greatly improve the anti-interference of the module, the 433 m
frequency hopping technology in a leading position in the industry module with time full duplex (TDD) features, at the
same time of receiving data, can send data, without waiting for receiving complete in some air rate and serial port baud
rate can be realized under the combination of full duplex serial transmission

For example: under the air rate of 64 k, the

serial port baud rate can be realized under 9600 BSP and full-duplex data transmission in a row, in this case, there is no
limit to send and receive the packet size, module can keep low latency/high response at the same time, to ensure that the
data is transmitted to the other party as soon as possible.

E62-DTU (433D30) strictly abides by domestic and foreign design specifications such as FCC, CE and CCC, and

meets various radio-frequency related certifications and export requirements.

1.2.

Features

All core components are originally imported; our transceiver modems have much advanced functions with smaller size

and lower cost.

The top TX power is 1W, all technical parameters meet European industrial standards.

Temperature compensators are adopted to make the frequency stability better than ±1.5PPM.

Operation temperature range: -40℃

+85℃, applicable for various harsh environment, it is real industrial grade

products.

Aluminum alloy case, compact size, great heat dispersion; good shielding, prime electromagnetic compatibility and

strong anti-interference.

Power reverse & overload protection and antenna surge protection functions significantly improve the reliability.

Parameters can be configured by programming, such as TX power, frequency point, air data rate, address and so on.

Ultra-low power consumption, standby current is only 40mA (even lower under power-saving and sleep modes), TX

current ≤0.3A .

Embedded watch-dog and precise time layout, modem will restart automatically upon abnormal situation and work

with previous parameters.

2.

Operation

Main parts

Summary of Contents for E62-DTU (433D30)

















Reviews: