Chengdu Ebyte Electronic Technology Co., Ltd.
E32-DTU(433L33)-V8 User Manual
Copyright ©2012–2022
，
Chengdu Ebyte Electronic Technology Co., Ltd.
11
recommended to configure the data transceiver to the normal mode (mode 0);
The factory default is normal mode (mode 0).
Mode
Categories
M1
M0
Notes
Mode 0
Normal
Mode
ON
ON
Open UART Comm port and RF
，
transparent
transmission is on, configuration over air via special
command is available.
Mode 1
WOR Mode
ON
OFF
Can be defined as WOR transmitter and WOR receiver
，
WOR is available.
Mode 2
Configuration
Mode
OFF
ON
Users access the register through the serial port to control the
working state of the device. The DTU can be configured
through the configuration software on computer.
Mode 3
Sleep Mode
OFF
OFF
DTU is in sleep mode.
★
Note: If there is no need for low power consumption, you don't need to care about the wake-up mode (mode 1) and power saving
mode (mode 2).
