Ebyte E220-400T22D User Manual Download Page 2

Page: 2 / 23

Chengdu Ebyte Electronic Technology Co., Ltd.

，

Chengdu Ebyte Electronic Technology Co., Ltd.

1. Overview.....................................................................................................................................................................3

2. Specification and Parameter....................................................................................................................................... 5

2.1 Limit Parameter................................................................................................................................................ 5
2.2 Operating Parameter.........................................................................................................................................5

3. Size and Pin Definition...............................................................................................................................................6
4. Recommended Connection Diagram..........................................................................................................................7
5. Function Description.................................................................................................................................................. 8

6. Operating Mode........................................................................................................................................................ 11

6.1 Mode Switching..............................................................................................................................................11
6.2 Normal mode

（

Mode 0

）

..............................................................................................................................12

6.3 WOR sending mode (Mode 1)....................................................................................................................... 12
6.4 WOR receiving mode (Mode 2).....................................................................................................................12
6.5 Deep Sleep (Configuration) Mode (Mode 3).................................................................................................13

7 Register Read and Write Control...............................................................................................................................13

7.1 Command Format...........................................................................................................................................13
7.2 Register Description....................................................................................................................................... 14
7.3 Factory Default Parameter..............................................................................................................................16

10.1 Communication range is too short............................................................................................................... 19
10.2 Module is easy to damage............................................................................................................................ 19
10.3 BER (Bit Error Rate) is high........................................................................................................................ 19

11. Soldering Operation Guidance............................................................................................................................... 20

11.1 Reflow Soldering Temperature.....................................................................................................................20
11.2 Reflow Soldering Curve............................................................................................................................... 20

12. Related Models....................................................................................................................................................... 21
13. Antenna Recommendation......................................................................................................................................21

13.1 Antenna Recommendation........................................................................................................................... 21

Summary of Contents for E220-400T22D
























Search results

Summary of Contents for E220-400T22D

Reviews:

Ebyte E220-400T22D, User Manual, Page: 2 / 23

Search results

Summary of Contents for E220-400T22D

Reviews: