Chengdu Ebyte Electronic Technology Co., Ltd.
E18-DTU Series User Manual
Copyright © 2012–20 23 , Chengdu Ebyte Electronic Technology Co., Ltd.
15
open the network for 180 seconds. The LINK light flashes at 1Hz. Routers and terminals can join the network within this time.
5.2 Quickly join a ZigBee network
(1) Open the host computer software "Ebyte ZigBee3.0 Setting", select the device type, select the serial port number, select the serial
port baud rate (default 115200), click to "Open Uart". Then set the module type to "Router" or "Node", then click "Write Param", and
then click "RST", at this time the role of the device is switched successfully.
(2) Click "Start Net", and the LINK light of the DTU device flashes rapidly at 10Hz. At this time, it is necessary to ensure that the
Summary of Contents for E18-DTU Series
Page 1: ......
