Chengdu Ebyte Electronic Technology Co., Ltd.
E104-BT06 User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co., Ltd
7.1.2 Air configuration
Open the app "BLE Test Tool", start scanning the device, and find the "E104-BT06" connection module;
Open the fff0 service of uuid and enable the configuration channel notiy;
Then enter the FFF3 service and send the authentication command (AT+AUTH=123456)
As shown in the figure below, after I send the authentication command, I send the NAME query command and
the module responds with OK and then my name (the response command for the air configuration channel is
the same as the serial port, refer to the command table)
7.1.3 Data transparent transmission
1. The module is powered on. Enable logmsg printing from the machine (AT+LOGMSG=1);
2. MODE pin is pulled high
3. The slave prints sta: connecte". The LINK pin is high.
4. The mobile phone sends the data "1234567890" to the module, and the slave receives the data as
"1234567890"
；
