Ebyte E07-400T10S, User Manual

Page: 10 / 15

Chengdu Ebyte Electronic Technology Co.,Ltd E07-400T10S User Manual
Copyright ©2012–2021
，成都亿佰特电子科技有限公司
99
4.1
Software design
Matters Illustration
1 Reading
materials Before starting software development, please read relevant materials in detail:
1
CC1101 Data manual
；
2
MSP430FR2433 Data manual
；
3
MSP Debuggers User's Guide
；
4
Chapter III and Chapter V of this manual
；
2
Simulator Please use TI's official MSP-FET simulation tool or MSP-FET 430UIF simulation tool.
MSP-FET Top View MSP-FET Bottom View
MSP-FET430UIF Top and Bottom Views
3 Commissioning
wiring
The TDO / TDI pin of the simulator is connected to the SWDIO pin of the module;
The TCK pin of the simulator is connected to the SWCLK pin of the module;
When the module itself is powered, VCC_TARGET is connected to the 3.3V pin of the
module;
When powered by the simulator, VCC_TOOL is connected to the 3.3V pin of the module;
The GND pin of the simulator is connected to the GND pin of the module.
MSP-FET 14-Pin JTAG Connector MSP-FET430UIF 14-Pin JTAG Connector
4 Download
sample code You can download the sample project from the official website of Ebyte, and open the content
as shown in the following figure