Ebyte 66060-ETH Series, User Manual, Page: 14 / 37

Chengdu Ebyte Electronic Technology Co., Ltd.
E831-RTU(6060-ETH)
User manual
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd 13
1 DO 5
Relay 5 output
indication
Green LED, NO 5, COM 5 are closed
2 DO 6
Relay 6 output
indication
Green LED, NO 6, COM 6 is on and off
3 DI 1
Digital input
channel 1 indication
Green LED, DI 1, DIG shorted up
4 DI 2
Digital input
channel 2 indication
Green LED, DI 2, DIG shorted up
5 DI 3
Digital input
channel 3 indication
Green LED, DI 3, DIG shorted up
6 DI 4
Digital input
channel 4 indication
Green LED, DI 4, DIG short-circuited
7 DI 5
Digital input
channel 5 indication
Green LED, DI 5, DIG short-circuited
8 DI 6
Digital input
channel 6 indication
Green LED, DI 6, DIG shorted up
9 DO 1
Relay 1 output
indication
Green LED, NO 1 and COM 1 are on and off
10 DO 2
Relay 2 output
indication
Green LED, NO 2, COM 2 is on and off
11 DO 3
Relay 3 output
indication
Green LED, NO 3, COM 3 are closed
12 DO 4
Relay 4 output
indication
Green LED, NO 4, COM 4 are closed
13 NET Network indication Yellow LED, long after entering the network
14 DATA
Serial data
indication
Yellow LED, RS485 interface lights up when data is
transmitted (expressively flashes)
15 WORK
Work/reset
indication
Yellow LED, flashing regularly / flashing after
successful reset
16 PWR Power indicator Red LED, long bright
Note: Grounding: It is recommended to connect the housing to the ground
2.3 Reload touch button description
Long press 5S is valid, after the reset is successful, the WORK lamp flashes quickly, and the Modbus device address,
RS485 serial port baud rate and check digit are restored to the factory settings.