Ebyte 433NW30-GPRS User Manual Download

Page: 7 / 17

Chengdu Ebyte Electronic Technology Co.,Ltd

E70-DTU (433NW30-GPRS) UserManual

Reload

Press 4~10s to restore the factory Settings

PWR

Red: power indicator

WORK

Yellow: data transmission indicator light; The light flashes when there is data transmission

LINK

Yellow: network indication, always on when in network

NET

4 G/GPRS antenna interface (SMA - K external thread hole, 50 Ω characteristic impedance)

SIM

SIM card slot

RF antenna interface (SMA - K external thread hole, 50 Ω characteristic impedance)

Note: It is recommended to connect the housing to the ground with a grounding screw.

2 Quick start

2.1 Hardware preparation and communication testing

Before the test, connect the power supply, USB cable, SIM card (insert the gap outwards), antenna and other hardware

according to the recommended circuit. If the power cable is successfully connected, the PWR indicator will always be on.

E70-DTU (433NW30-GPRS) and E70-433NWxx

5V—20V power adaptor

USB to TTL test board and USB cable

GPRS/LTE sucker antenna

Summary of Contents for 433NW30-GPRS


















Search results

Summary of Contents for 433NW30-GPRS

Reviews:

Related manuals for 433NW30-GPRS

Brands by name

Popular brands

Ebyte 433NW30-GPRS, User Manual

Search results

Summary of Contents for 433NW30-GPRS

Reviews:

Related manuals for 433NW30-GPRS

Brands by name

Popular brands