background image

Chengdu Ebyte Electronic Technology Co.,Ltd.

E90-DTU(2G4HD12)

User Manual

Copyright ©2012–2020

Chengdu Ebyte Electronic Technology Co.,Ltd.

4

1.3 Features

Using automatic frequency hopping technology, it has strong anti-interference ability and stable communication;

Support two-way continuous data transmission function;

The product supports AT commands and host computer configuration;

4-level port protection capability;

Simple high-efficiency power supply design, support power supply configuration or pressure line mode, support 8 ~
28V power supply;

The transmit power can reach up to 12dbm, and all technical indicators meet European industrial standards;

Working temperature range: -40℃

+85℃, suitable for various harsh working environments, real industrial grade

products;

All aluminum alloy shell, compact size, easy installation, good heat dissipation; perfect shielding design, good
electromagnetic compatibility, strong anti-interference ability;

Multiple protection functions such as power reverse connection protection, over-connection protection, and antenna
surge protection greatly increase the reliability of the radio;

Simple and easy to use, wireless communication can be carried out after the factory power-on connection is
successful;

Built-in hardware watchdog, and accurate time layout, once an exception occurs, the module will automatically
restart, and can continue to work according to the previous parameter settings.

Summary of Contents for 2G4HD12

























Reviews: