EBS
Ink-Jet Systems
®
EBS-6100
Printer User's Manual
Paragraph 4 - Operating the Printer
20070529#20.5
61
Print Resolution
1
Resol. dot/cm
2
1, 2, 3, ... , 100
3 30
4 YES
The parameter affects the print rate. It defines the resolution
(number of dots/centimetre) at which a text is to be printed. In
other words, the visual effect of a change in the
Resol. dot/cm
parameter is a change in the width of characters and the length
of the entire overprint - see also section
4.6 Adjusting the
Print Rate
.
Travel Speed
1
Cnv spd m/min
2
0,1 ; 0,2 ; ... ; 2500
3 10,0
4 YES
In order to produce clear overprints, match the rate at which
vertical rows are printed with the speed at which objects travel
in front of the print head. The matching is ensured by setting
the
Cnv spd m/min
print parameter to the conveyor travel
speed (number of metres/minute).
The travel speed can be measured with the
CONVEYER MEASUREMENTS
service command - see also
sections
4.4.4.11
Defining Some Print Parameters by
Measuring Conveyor Travel Speed
and
4.6 Adjusting the
Print Rate
.
Number of Pulses Generated by External Encoder
1
Enc const p/m
2
50, 51, 52, ... ,
300000
3 10000
4 YES
The shaft-encoder, a travel speed indicator, is mechanically
coupled with the conveyor and generates timing pulses for
printing vertical rows. The number of timing pulses depends on
the type of encoder and mechanical transmission gear between
the encoder and the conveyor. The
Enc const p/m
parameter defines the number of pulses generated by the
encoder while objects are moving over a unit distance (1
metre). The quantity can be measured with the
CONVEYER MEASUREMENTS
service command - see also
section
4.4.4.11
Defining Some Print Parameters by
Measuring Conveyor Travel Speed
and
4.6 Adjusting the
Print Rate
.
NOTE:
Boundary limits are defined for the
Resol. dot/cm
and
Cnv spd m/min
print parameters.
Current settings of the parameters are monitored by the control program and can be
limited by the settings of other print parameters and the actual row height (of 7, 16, 25 or
32 dots). The parameter is automatically protected against the setting of too high a print
rate. Therefore some settings may not be accepted.
4.4.3.6. Saving Current Parameters in a Block
You can modify some print parameters during printing to customise them to your
needs. The modified parameters can be input to the block library with their names
and saved in the printer’s memory.
In the main MENU select the
PRINTING
item and then the
SAVE CURRENT PARAM.
item.
!
Summary of Contents for EBS-6100
Page 1: ...EBS Ink Jet Systems EBS 6100 USER S MANUAL...
Page 2: ......