EBS-6100
Printer User's Manual
Paragraph 4 - Operating the Printer
EBS
Ink-Jet Systems
®
52
20070529#20.5
the
Y¢
(
HOME
) or
Y£
keys to position the cursor on the first
parameter setting,
the
Y¡
(
END
) or
Y¤
keys to position the cursor on the last parameter
setting.
Changes to the settings of each of the parameters are made with the
¡
and
¢
keys. Numerical settings can also be input directly from the keypad and confirmed
with the
V
key.
NOTE:
The creation or edition of a parameter block have no direct impact on current
settings - see section
4.4.3.5
Print Parameters
.
4.4.2.2. Editing Existing Blocks of Parameters
In the main MENU select the
PARAMETERS SERVICE
item and then the
EDIT PARAM. BLOCK
item.
The display shows the parameter block library from which a block name should be
selected (see also section
4.4.2
Using Print-Parameter Blocks
).
The parameter block processor starts running and you can modify the parameter
settings. After the settings have been modified and the modifications confirmed, the
parameter block is stored in the library.
For linking parameter blocks with subfiles see section
4.4.1.8
Linking File Names
with Parameter-Block Names
.
NOTE:
The edition or modification of a parameter block have no direct impact on current
settings. For details see section
4.4.3.5
Print Parameters
.
4.4.2.3. Copying and Editing Blocks of Parameters
You can create a new block of parameters by copying an existing block and
saving it with a
different name. In the main MENU select the
PARAMETERS SERVICE
item and then the
COPY & EDIT BLOCK
item.
The display shows the parameter block library from which you should select the name
of the block to be copied (see also section
4.4.2
Using Print-Parameter Blocks
).
Type in an up to 8-character name for a newly copied block.
If the newly typed in block name already exists in the library, the
BLOCK NAME EXISTS
message is displayed.
The parameter processor starts running and the settings can be edited. The process
goes in the same way as described in section
4.4.2.2
Editing Existing Blocks of
Parameters
.
4.4.2.4. Deleting a Block of Parameters
In the main MENU select the
PARAMETERS SERVICE
item and then the
DELETE PARAM. BLOCK
item.
!
!
Summary of Contents for EBS-6100
Page 1: ...EBS Ink Jet Systems EBS 6100 USER S MANUAL...
Page 2: ......