USERS MANUAL
EBS DYNAVERB - STUDIO EDITION
w w w . e b s s w e d e n . c o m
w w w . e b s s w e d e n . c o m
ADVANCED CONTROL OPTIONS (inside the box)
CHANGING TO PARALLEL MODE
The EBS DynaVerb can be set to parallel
mode, which makes it suitable for
connecting to mixing consoles and so using
the unit just as if it was a rack effects unit.
To do so, carefully remove the four bottom
screws, take off the bottom cover and
change the two small switches to ”OFF”.
This will kill the direct signal from the reverb.
Since no direct signal is present in parallel
mode , it is good practice to turn up the
Reverb and Tone knobs to maximum setting
to start with. Note also that when the pedal
is bypassed, no signal is present at the
outputs.
!
If you are not 100% sure on how to do this, please consult your nearest service
center. Excessive force may result in damage to the unit, and the warranty in that
case will be void.
