I
NTRODUCTION
•
G
ETTING
S
TARTED
S
PECIFICATIONS
The EBS Drome Classic is an ultra-compact and unbelievably light 150W bass
combo with incredible sound, filled with unique possibilities!! The old Viking
myths says; "To keep the diabolical Fenris wolf from killing the Norse Gods
(Odin, Thor, Freya and the others) an impossibly strong necklace, "
Drome
",
was created, which would keep the evil wolf under control!"
.
2
INPUT:
Input Impedance
1 Mohms // 100 pF
GAIN:
Gain Range
min/center/max
-
∞
/ +6 /+26 dB
Gain Peak LED
+10 dBv
Frequency Response
+0/-3 dB
35 – 20.000 Hz
CHARACTER:
Filter:
Type
Shelving High Pass
Gain:
+6 dB @ 6 kHz
FILTER SECTION:
Bass Filter:
Type
12 dB/oct. Shelving
Gain Range
+/- 15 dB @ 100 Hz
Middle Filter:
Type
Bandpass Filter
Frequency Range
50 – 3.000 Hz
Q - Nominal
0.5
Q - Notch mode
10
Gain Range
+/- 12 dB @ 600 Hz
Notch -15 dB min
Treble
Filter:
Type
Bell
Q
0.5
Gain Range
+/- 15 dB @ 4 kHz
Bright Filter:
Type
High Pass
Gain Range
-0 / +20 dB @ 10 kHz
COMP/LIMIT:
Compressor Gain
0 dB
Attenuation
max
24
dB
Compression
Ratio
max
3:1
Attack (80%)
typ
<10 ms
Release (80%)
typ
100 ms
Distortion
1 kHz/0 dBv
0.04 %
10 kHz/+15 dBv
0.22 %
BALANCED OUTPUT:
Output Level
nominal
- 10 dBv
Output Impedance
< 10 ohms current lim.
XLR Connections
1-GND, 2-Hot, 3-Cold
Options
Pre/Post EQ,
GND
LIFT
EFFECTS LOOP:
Loop Signal Level
nominal
-10 dBv
Gain
Unity
(1:1)
Output Impedance (Send)
<100 ohms
Input Impedance (Return)
47 kohms // 100 pF
Loop
Mode
Serial
LINE OUT:
Output Impedance:
< 5 kohms
Nominal Signal Level:
0 dBv
POWERAMP:
Continuous Output Power
150 W RMS
CABINET:
Impedance
4
ohms
Frequency Response
+0/-3 dB
60 Hz – 20.000 Hz
Volume
28
liters
AUXILIARY INFO:
Power Requirements
max
200 W
Mains Protection:
T2A Fuse ( 230V )
T4A Fuse ( 120/100V )
Dimensions:
17" ( 43 cm ) Width
12" ( 30 cm ) Depth
20” ( 50 cm ) Height
Weight:
40 lbs. ( 18 kg )
Specifications are subject to change without notice!
11
EBS Drome Classic
är den mest kompletta,
kraftfulla och flexibla kompakta bascombo
som någonsin har tillverkats. Med inbyggda
superaktiva filter och det klassiska EBS
ljudet, erbjuder
EBS Drome Classic
en
mängd möjligheter, som beskrivs i denna
manual. Men först av allt följer en
introduktion som hjälper dig att bli bekant
EBS Drome Classic
.
A
TT KOMMA IGÅNG
...
1.
Packa försiktigt upp combon.
2.
Se till att alla kontroller är ställda fullt
motsols. Fortsätt med att ställa de tre
filterrattarna märkta BASS, MIDDLE
och TREBLE till mittposition. Leta upp
filteromkopplaren och ställ den i läge
BYPASS. Se även till att omkopplaren
märkt
Character
är i uttryckt läge. Nu
är ljudet i
EBS Drome Classic
"nollställt" och redo för att skapa just
ditt personliga sound.
3.
Koppla in din bas.
4.
Spela hårt på basen och vrid upp GAIN
ratten tills PEAK dioden börjar blinka.
Än har du inget hörbart ljud, men en
perfekt signal att jobba vidare med.
5.
Sök och vrid upp VOLUME ratten till
lämplig ljudnivå.
The
EBS Drome Classic
is the most
powerful, versatile and complete compact
bass combo ever built. With built-in super
powerful EQ, the unit offers an extremely
wide range of possibilities, while
maintaining that classic EBS sound. These
brief tutorials will help you to become ac-
quainted with some of the features of the
EBS Drome Classic
.
G
ETTING STARTED
...
1.
Carefully unpack the bass combo.
2.
Check that the controls are set fully
counter clockwise. Proceed by turning
the three filter knobs marked BASS,
MIDDLE and TREBLE to mid position.
Locate the filter switch and set it to
BYPASS. Make also sure that the
switch marked
Character
is in its’ outer
position. Now the
EBS Drome’s
Classic
settings are "zeroed" and ready
to be personalized.
3.
Plug in your bass.
4.
While plucking the strings as hard as
you would during your hardest playing,
gradually increase the GAIN knob until
the PEAK led starts to flash at peaks.
5.
Move over to the VOLUME knob and
adjust for the desired output volume.