USERS MANUAL
EBS BASS IQ - BLUE LABEL EDITION
w w w . e b s s w e d e n . c o m
w w w . e b s s w e d e n . c o m
THE CONTROLS
Q
controls the bandwidth or the ’Q’ value of
the filter, i.e. the sharpness and peak of the
filter.
THRESH.
controls the sensitivity of the filter. The
higher the setting, the higher the sensitivity.
Use this to fine-tune the BassIQ’s dynamic
response, so that the filter will react to how
hard you play.
ATTACK
controls how fast the filter will react.
Minimum setting on this knob will allow the
filter to react immediately. The maximum
setting gives the filter a delayed response of
approximately 2 seconds.
MODE
UP
will “open” the filter, that means the response
goes from low to high frequencies. This is the
classic operation of an envelope filter.
UP-R
is a special mode of UP where you can
use an internal range trimmer control to set
the dynamic sensitivity.
DWN
is a reversed action from UP, from high to
low frequencies. This mode is useful to create
synth-bass like sounds.
Q
THRESH.
ATTACK
