USERS MANUAL
EBS BILLY SHEEHAN ULTIMATE SIGNATURE DRIVE
w w w . e b s s w e d e n . c o m
USING THE LOOPS
The Billy Sheehan Ultimate Signature Drive pedal gives you the option
to use additional effects to affect either the Clean or Drive channel
independently (the photo shows a reverb connected to the Drive Loop).
When using the loops, use an insert cable of a standard TRS type,
such as the EBS ICY-30, where the RING is the SEND signal, and the
TIP is the RETURN signal back to the pedal.
Note: You may also connect a mono plug directly into the insert jacks
without damaging the send output. Example: if your bass has separate
outputs for low and mid/high frequencies, you can use the Clean Loop
as an input for the lows and use the main input for the highs/mids.
