EBS Ink-Jet Systems EBS-6200, User Manual

Page: 34 / 124

EBS-6200
Printer User's Manual
Chapter 4 - Operating the Printer
32
20091020#1.0
PARAMETER DESCRIPTION AND SETTINGS DEFAULT
Char. se
e the above specified sample character
ents.):
Latin 16x10 , as high as
Character generators se
t
5 , Latin 7x5 , Latin 9x5 ,
:
Latin 5x
Latin 25
matrices. (The number and types of generators installed in the
printer depend on the type of print head used and user
requirem
x15 , Latin 32x18 , Latin 21x15 , Cyrillic 25x19 ,
Cyrillic 16x10 , Cyrillic 7x6 , Arab.Dg.7x5 , Lat__5x5__ ,
Spec 25 , Spec 16 , Spec 7 Latin 9x7 ,
Latin 11x8 , Latin 16x14 .
possible
Typeface :
Texts can be printed boldface or printing of every vertical row can
be repeated n times (n=2÷15).
Bold , Normal , Length *2 , .... , Length *15
Normal
Distance :
Distance (a number of dots) between characters in vertical rows.
0 , 1 , 2 , .... , 15
2
Rotation :
Every character within a subfile can be rotated.
None , Right , Upside down , Left
None
Spec.reg. count. , Time , None :
The so called special register can also be used as a subfile. Its
contents can vary during printing - see section
4.4.1.10 Using
Special Registers
.
None , Up counter , Down
Date , Spec. chan. , Univ.count. , Univ. date ,
Date+offs. , Date+offs.2
Leading spacing before a subfile, given as a number of vertical
rows (dots).
Front dis :
0
,
1
,
2
,
3
,
....
,
5000
0
Leading spacing after a subfile, given as a number of vertical rows
(dots).
Back dist :
0 , 1 , 2 , 3 , .... , 5000
0
NO
•
s g the §
TE:
While editing a ubfile you can modify subfile parameters at any time (by pressin
key).
•
While editing a subfile you can change its type at any time (by pressing the § key). After
the subfile type has been changed (and possibly subfile parameters modified) and confirmed,
the previous contents of the subfiles are erased.
!
Subfile Type: Graphics
A G
RAPHICS
subfile is a block of pixels (on the display) or dots (on an overprint) that are set/erased
When the
§
key is pressed in the word processor, parameter menu is displayed for your subfile.
FAULT
separately.
The parameters have the following meaning.
PARAMETER DESCRIPTION AND SETTINGS DE
Type :
Subfile type. Any parameters shown below are typical of
a
Graphics subfile.
Graphic , Barcode , Ins. text , sub Text
Text