11
1340-5130
04/10
EN
Instruction manual
Settings
Device is switched off
Open confi guration mode: Keep
HOLD
pushed for >3 seconds.
1
Select
AutoHold:
push
, push
HOLD
, select
or use
to adjust the period
of time (5, 10, 15 or 20s) that a measuring value must be stable (deviation less
than 0.2°C) in order to be held, confi rm with
HOLD
.
2
Select
ALARM:
push
, push
HOLD
, use
or
in order to set the upper alarm
value
MAX
. Keep the button pushed in order to accelerate the selection, confi rm
with
HOLD
. If necessary, please repeat the process for the lower alarm value
MIN
,
confi rm again with
HOLD
,
push
in order to switch the acoustic
signal
or
, confi rm with
HOLD
.
3
Select Temperature unit (°C or °F): push DOWN, push
HOLD
, select the requested
unit °C or °F with
, confi rm with
HOLD
.
Device is switched on
1
Select
AutoOff
: Push
in order to activate or deactivate AutoOff. The instru-
ment automatically switch-off after approx. 10 min when AutoOff is active.
2
Set
Display illumination
: push
in order to activate or deactivate the display
light
.
Service and Maintenance
Change probe
Device must be switched off!
Turn threaded socket anti-clockwise and pull out probe. Mount new probe (please
take note of the contact pins) and fi x the threaded socket by turning it clockwise.
Clean the device
Do not use aggressive cleanser or solvent!
Clean the housing and the probe with a damp cloth (soap-suds).
