• vvv
8
ebony
convertible booster
group II + III installation (15-36kg)
Car seat installation
Group II+III(15~36kgs)
If use the safety seat in group II+III with backrest.
Operate as follows:
3.Place the child car seat on the passenger seat ensuring it is firmly against the
vehicle seat.(See 6)
4.Sit your child on the child car seat with their back against the backrest. Place the seat belt
around your child positioning the lap section of the safety belt under both armrests, then
harness clips until you hear a noticeable “click”.(See 7)
1.Pull out the metal harness yoke from the back of the restraint, then remove the shoulder
belt harness and the belt cover from the metal harness yoke, from front of car seat, pull the
shoulder straps out of the harness slot. Remove the cover of the booster seat, pass the metal
connector down through the hole, pull up the buckle, the whole buckle strap can be removed.
(See 1/2/3)
2.Cut off the front adjusting strap, then the whole harness system can be removed.(See 4/5)
Adjustable headrest:
7
8
push-pull the headrest for an appropriate position to fix it
“
Click
”
7
6
4
1
2
3
5
1. Pull out the metal harness hook from the back of the restraint, then remove the shoulder belt
harness and the belt cover from the metal harness hook. From the front of the car seat, pull
the shoulder straps out of the harness slot. (See 1/2)
2. Remove the cover of the booster seat, pass the metal connector down through the opening,
pull up the buckle, and the whole buckle strap can be removed. (See 3/4/5)
If using the safety seat in group II + III with backrest
Operate as follows:
