19
Helpful Hints
Installing and Removing the Lens:
A)
Removal
BEFORE
your LightSpeaker
®
is installed.
1)
While holding the LightSpeaker
®
in the palm of your hand
rotate the unit until one of the holding tabs is facing up.
2)
Using a fingernail, common screwdriver or other small
flat object, gently push down and then out on the tab, easing
it out through the opening in the LightSpeaker
®
housing.
3)
When the lens pops up, gently pry it away from
the housing, being gentle and making sure not to
break the tabs.
CAUTION: Do not touch the LED or Speaker Baffle
with the lens off when the unit is hot, allow the unit
to cool down before touching the LED.
