Operating instructions
R3G160-AC50-01
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All dimensions in mm.
1
Accessory part: inlet ring 09588-2-4013 not included in scope of delivery
2
Tapping hole prepared for self-tapping M4 thread, max. screw-in depth 8 mm
3
Tapping hole prepared for self-tapping M4 thread, max. screw-in depth 6 mm
4
Screw-in depth 8-10 mm; tightening torque 2.5±0.2 Nm; gluing the screws is recommended
5
Cable PVC AWG18
3x wire-end ferrule
6
Cable PVC AWG22
4x wire-end ferrule
Item no. 53780-5-9970 · ENU · Change 202174 · Approved 2018-12-28 · Page 4 / 11
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com