Operating instructions
K3G400-AQ23-31
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All dimensions in mm.
1
Inlet ring with pressure tap (k-factor: 188)
2
Cable diameter min. 4 mm, max. 10 mm; tightening torque 4±0.6 Nm
3
Tightening torque 3.5 ± 0.5 Nm
4
Installed position: Shaft horizontal (only install support struts vertically as illustrated) or rotor on bottom; rotor on top on request
Item no. 50648-5-9970 · ENU · Change 209539 · Approved 2021-02-12 · Page 4 / 15
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com
