Operating instructions
K3G355-BC92-32
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All dimensions in mm.
1
Installed position: Shaft horizontal (only install support struts vertically as illustrated) or rotor on bottom; rotor on top on request
2
Cable diameter min. 4 mm, max. 10 mm, tightening torque 4 ± 0.6 Nm
3
Inlet ring with pressure tap (k-factor: 148)
4
Tightening torque 3.5 ± 0.5 Nm
Item no. 52843-5-9970 · ENU · Change 212946 · Approved 2020-07-14 · Page 4 / 14
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com