Operating instructions
K3G310-AX52-05
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All measures have the unit mm.
1
Inlet nozzle with bleeder connection for pressure relief (k-factor: 116)
2
Connection line AWG 18 with connector housing AMP order no. 1-480 702-0 with 4 x plug pin AMP order no. 926 885-1
2.1
PE (green / yellow)
2.2
L3 (black 3)
2.3
L2 (black 2)
2.4
L1 (black 1)
3
Connection line AWG 18 and AWG 22 with connector housing Phoenix order no. 17 57 05 1
3.1
+10V (red)
3.2
GND (blue)
3.3
0-10V / PWM (yellow)
3.4
Not defined (orange)
3.5
NC - alarm (white1)
3.6
COM - alarm (white 2)
4
Mounting position: shaft horizontal (install the support struts only vertically as shown in the view!) or rotor on bottom; rotor on top on
request
Item no. 50749-5-9970 · Revision 70943 · Release 2011-12-06 · Page 4 / 11
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com