Operating instructions
G1G144-AF25-01
Translation of the original operating instructions
You can control the blower either via the 0-10 VDC input or the
PWM input. Note: Inputs cannot be used simultaneously.
3.2 Nominal data
Motor
M1G055-BD
Phase
1~
Nominal voltage / VAC
230
Frequency / Hz
50
Type of data definition
ml
Speed / min
-1
5400
Power input / W
94
Current draw / A
0.67
Min. ambient temperature
/ °C
-25
Max. ambient temperature
/ °C
50
Min. temp. of flow
medium / °C
-25
Max. temp. of flow
medium / °C
+80
ml = Max. load · me = Max. efficiency · fa = Running at free air
cs = Customer specs · cu = Customer unit
Subject to alterations
3.3 Technical features
Mass
1.6 kg
Size
144 mm
Surface of rotor
Thick layer passivated
Material of protective
cover
PP plastic
Material of impeller
PA plastic
Housing material
Die-cast aluminium
Direction of rotation
Clockwise, seen on rotor
Type of protection
IP 20
Insulation class
"B"
Mounting position
Any
Condensate discharge
holes
None
Operation mode
S1
Premix
Not suitable for pre-mixture.
Motor bearing
Ball bearing
Technical features
- Tach output
- Motor current limit
- Control input PWM
Touch current acc.
IEC 60990 (measuring
network Fig. 4, TN
system)
<= 3.5 mA
Motor protection
Reverse polarity and locked-rotor
protection
Remark
Complete unit must be tested for required
approvals.
For cyclic speed loads, note that the rotating parts of the device
are designed for maximum one million load cycles. If you have
specific questions, contact ebm-papst for support.
3.4 Mounting data
For depth of screw, see chapter 3.1 Product drawing
;
Secure the mounting screws against accidentally coming loose (e.g.
by using self-locking screws).
Strength class for
mounting screws
8.8
You can obtain additional mounting data from the product drawing if
necessary.
3.5 Transport and storage conditions
;
Use the device in accordance with its protection type.
Max. permissible
ambient motor temp.
(transp./ storage)
+ 80 °C
Min. permissible
ambient motor temp.
(transp./storage)
- 40 °C
Item no. 51289-5-9970 · Revision 79946 · Release 2013-12-02 · Page 5 / 11
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com