ebm-papst AF1250-001, Operating Instructions Manual, Page: 3 / 12

Part Number
Operating Instructions
Item no. LS-122. Revision 002 Release 18/02/2016 Page 3 of 12
ebm-papst A&NZ Pty Ltd
10 Oxford Road · Laverton North VIC 3026 · Phone +61 (03) 9360 6400 · Fax +61 (03) 9360 6464
ABN 33 115 927 556 NSW Phone +61 (02) 9827 6400 · NSW Fax +61 (02) 9827 6464 · NZ Phone +64 (09) 525 0245 · NZ Fax +64 (09) 525 0246
sales@ebmpapst.com.au · www.ebmpapst.com.au
AF1250-001
AFFB1250-00
 Make sure that all screwed cable glands are fitted with
dummy plugs.
1.12 Disposal
Comply with all relevant local requirements and regulations
when disposing of the device.
2. INTENDED USE
The device is exclusively designed as a built-in device for
moving air according to its technical data.
Any other usage above and beyond this does not conform with
the intended purpose and constitutes misuse of the device.
Customer equipment must be capable of withstanding the
mechanical and thermal stresses that can arise from this
product. This applies for the entire service life of the equipment
in which this product is installed.
Intended use also includes

Using the device only in stationary systems.

Performing all maintenance work.

Conveying air at ambient air pressure between 750
mbar and 1050 mbar.

Using the device within the permitted ambient
temperature range, see chapter 3.5 Transport and
storage conditions and chapter 3.2 Nominal data.

Operating the device with all protective devices.

Following the operating instructions.
Improper use
In particular, operating the device in the following ways is
prohibited and could be hazardous:

Operating the device in an imbalanced state, e.g. due
to dirt deposits or ice formation.

Operation in medical equipment with a life-sustaining
or life-supporting function.

Operation with external vibrations.

Conveying solids in the flow medium.

Painting the device.

Connections (e.g. screws) coming loose during
operation.
 Opening the terminal box during operation.

Conveying air that contains abrasive particles.

Conveying highly corrosive air, e.g. salt spray.
Exceptions: devices designed for salt spray and
correspondingly protected.

Operating the device close to flammable materials or
components.

Operating the device in an explosive atmosphere.

Using the device as a safety component or to perform
safety related functions.

Operation with completely or partially disassembled
or manipulated protective devices.

In addition, all application no listed among intended
uses.