www.ebikekit.ch
Yes
Movement time（TIME）
Time corresponds to a single mileage required
。
Movement time
Show diagnostic code
Show diagnostic code .Easy to detective the failure. Once the controller encounters an issue, the related error
code will occur on the speed bar of the panel.
Diagnostic code
5.4 Hiding function and show
To enter the hiding function, at OFF state you should press these two buttons at the same time for 3
seconds on startup screen, then all the items
（
including normal functions and special functions
）
shows up.
Then wait for about a second until the screen changes. Then go quickly through the modes (menue steps).
There are 11 levels of mode (odometer, trip distance, average speed, one way time, wheel diameter selection,
magnetic steel number selection, speed units selection, 6/Km/h function selection, top speed selection, power
adjustment selection, selection).Press this button to adjust the mode, 25/Km/h function selection. Default is
odometer. (Tip: Just cycle time, the second will resume normal mode.
ODO TRIP AVG TIME d1 Km/mile
No
25Km/h
MOLD
A
SD 6.0Km/h
