OPERATING INSTRUCTIONS AND READING OF THE ROTATING BEZEL
In order to adjust the bezel it is necessary to rotate counterclockwise to align the zero index and
the minutes-hand of the watch . From then onwards it is possible to read the time continuously that
elapses during diving or in any other situation. The zero index and the traits of the first 15 minutes scale
displayed on the ceramic bezel are luminescent to optimise readability.
MAINTENANCE OF THE RUBBER STRAP
It is recommended to periodically clean the a strap with soap and water avoiding the use of aggressive
detergents.
DIRECTIONS FOR USE OF WATER-RESISTANT WATCHES
We strongly recommend that you verify the position of the crown before all underwater activities. After use
in seawater, rinse the watch in fresh water. Don’t adjust the crown while the watch is wet.
We strongly recommend that you let check the water-resistance by a qualified technical service facility at
least once a year, or in any case before intensive use, and to have the gaskets replaced if necessary.
CONFORMITY TO THE ISO STANDARDS
– Test of bracelet’s traction resistance – ISO 6425:1996
– Under-water visibility test of diving watch – ISO 6425 - § 6.2
– Test of water-tightness and resistance at a water overpressure – ISO 6425
– Test of magnetic resistance – ISO 764 (NIHS 90-10)
– Pendulum-hammer shock test – ISO 1413 :1984 (NIHS 91-10)
Summary of Contents for SCAFOGRAF 300 MCMLIX
Page 1: ...USER MANUAL SCAFOGRAF 300 MCMLIX...
Page 8: ......
