ROT
EN
28
29
9.7. Set the desired temperature in the selected range and then confirm „Done”.
In order to delete the content of the time interval, press „Delete”.
The setpoint temperature must be higher than the actual room temperature.
Then activate the „Smart” mode - „Smart” according to point 9.3.
10. BATTERY REPLACEMENT
1.
Remove the battery cover.
2.
Insert two AA alkaline (R6 1.5V) batteries.
3.
Reinsert the battery cover.
11. TROUBLE SHOOTING
If the device does not turn on, follow the instructions below:
•
Check that the heating panel is connected and the electrical outlet is working properly.
•
Check the fuse of the building’s / flat’s electrical network.
•
If the device still does not work properly, contact an authorized service center to check and, if necessary, repair
the device.
ATTENTION!
IF A PROBLEM OCCURS WITH THE DEVICE, UNDER NO CIRCUMSTANCES SHOULD YOU DISMANTLE THE
DEVICE OR ATTEMPT TO REPAIR YOURSELF. SUCH ACTIONS WILL VOID YOUR WARRANTY AND MAY RESULT IN FIRE,
ELECTRIC SHOCK, INJURY OR PROPERTY INJURY. IN THE EVENT OF MALFUNCTION OF THE DEVICE, CONTACT AN
AUTHORIZED SERVICE CENTER OR DISTRIBUTOR.
