NOX
GB
13
www.eberg.eu
5.
There are two operating modes of the device:
a) Lower mode: 1000W
b) Higher mode: 2000W
Press the button
to change the mode.
6.
Timer: Press the
button to set the time after which the device will automatically turn off. The time
range is from 1 hour to 8 hours.
7.
To set the temperature, use the „+” and „-” temperature adjustment buttons. The temperature range
is from 10 ° C to 35 ° C. Press „+” to increase the desired temperature and „-” to decrease it.
8.
When the room temperature drops by 4 ° C, the device will operate on the higher heating mode
- 2000W. When the room temperature drops by 2 ° C, the device will work on the lower heating
mode - 1000W. After reaching the set temperature, the device will turn off the heating mode and
starts the fan, which will work until the room temperature drops again by 2 ° C or 4 ° C. The device
automatically returns to heating.
9.
Oscillation - press the button to acticate oscillation. Press the button again to disable this function.
10. To turn off, press the button . The device keep working for 30 seconds, blowing cool air to cool the
components.
REMOTE CONTROL
The remote control allows you to manage the same functions as the control panel on the device.
Please use lithium battery CR2025 3V.
Press on the cover of the battery compartment located on the
bottom of the remote control. Pull out the battery compartment
and place the battery. Make sure that the „+” on the battery is at the
top. Slide the cover with the battery back into the remote control.
