Eberg GOX User Manual Download Page 8

GOX

EN

8

www.eberg.eu

It is important that you read these instructions before using your product and we strongly recommend 

that you keep them in a safe place for future reference.

SAFETY NOTES

1. 

Make sure that the mains supply matches the voltage specified on the fan nameplate.

2. 

Do not repair or remake the appliance by yourself, it should be repaired by the repairmen.

3. 

Do not operate the appliance with wet hands, in order to avoid damage.

4. 

The use of extension cords is not recommended as they can overheat and there is a risk of fire. 

5. 

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard.

6. 

Do not leave the device connected to the power supply unattended.

7. 

When the appliance is not in use, switch it off and unplug it.

8. 

Do not insert things to air outlets and inlets, in order to avoid damage.

9. 

Do not use the appliance near explosive and combustible gas.

10.  Use the appliance only on a flat surface.

11.  Do not use outdoors.

12.  Do no turnover the appliance. Unplug the power supply. If it is toppled over and there have some 

water in the body. Dry the body before use.

13.  Clean the appearance with a lightly damp cloth. It can clean with neutral detergents.

14.  Make sure that all adjacent objects are at least 1 meter from the appliance (e.g. walls, furniture, 

curtains, curtains). 

15.  Do not knock or shake the body when use, otherwise it may cause stop.

16.  The appliance must not located immediately below a  socket outlet. The rating current of socket 

should exceed 10A.

17.  Do not use the appliance in the immediate surrounding of a bath, a shower or swimming pool.

18.  This appliance is not intended for use by persons including children with reduced physical, sensory 

or mental capabilities or lack of experience and knowledge unless they have been given supervision 

or instruction concerning use of the appliance by a person responsible for their safety.

19.  Children should be supervised to ensure that they do not play with the appliance.

20.  Do not put any objects on the cord and do not bend it.

21.  Do not use the device in an atmosphere with high humidity (e.g. bathroom, laundry room).

22.  Avoid covering the fan to prevent overheating.

23.  Always disconnect the power cord when servicing or moving the fan.

24.  Do not connect the device to the mains supply without making sure that it is properly assembled 

and positioned.

25.  In the event of any irregularities in the operation of the device (unusual noise or strange smell), 

immediately turn off the device, do not try to repair it, but contact an authorized service center. 

Summary of Contents for GOX

















Reviews: