EDO
EN
10
www.eberg.eu
shock and risk of damage to the device.
•
Do not pour water into the mist output of the device.
•
A loose fit between plug and the socket may cause overheating and a distortion of the plug. Before
connecting the apliance to the power source, make sure that the power socket isn’t damaged.
•
Do not sit, stand, or lean on the device. Do not place any objects on the device.
•
To prevent the risk of electric shock and fire, do not immerse the device in water or other liquids.
In case of such accident, immediately disconnect the device from the power socket and let the
authorized service center check the device before restarting.
•
Do not pour essential oils, fragrances and similar additives directly into the water tank. The
use of water additives damages the material of the tank and consequently the entire device.
•
Essential oils can only be used in a special aroma container located in the base of the device.
•
Avoid water freezing in the humidifier tank.
•
Empty the water tank and dry all parts of the humidifier when the device is not used.
•
If the device was stored in temperature below 0 degrees, allow it to reach the room temperature
(wait at least 2 hours) before turning on.
•
When not in use, the humidifier should be stored in a dry place.
•
The high-frequency vibrations emitted by the device are not audible by humans or animals.
•
The manufacturer reserves the right to make minor changes of the design of the product without
prior notice, unless these changes have a significant impact on the safety, performance and
functionality of the product.
