COOLY C35HD BLACK
EN
24
www.eberg.eu
• Always transport your appliance in a vertical position and place on a stable, level surface
during use. If the unit is transported laying on its side it should be stood up and left unplugged
for 6 hours.
• Always use the switch on the control panel or remote control to turn the unit off, and do not
start or stop operation by plugging in or unplugging the power cord. It can result in the risk
of electric shock.
• Do not touch the buttons on the control panel with your wet and damp fingers.
• Do not use hazardous chemicals to clean or come into contact with the unit. To prevent
damage to the surface finish, use only a soft cloth to clean the appliance. Do not use wax,
thinner, or a strong detergent. Do not use the unit in the presence of inflammable substance
or vapour such as alcohol, insecticides, gasoline, etc.
• Young children should be supervised to ensure that they do not play with, operate or climb
on the appliance.
• If the appliance is making unusual sounds or is emitting smoke or an unusual odor, unplug it
immediately.
• Do not clean the unit with water. Water can enter the unit and damage the insulation, creating
a shock hazard. If water enters the unit, unplug it immediately and contact Customer Service.
• Utilize two or more people to lift and install the unit.
• Be sure all accessories are removed from the packing before use.
• To avoid possible cuts, avoid contacting the metal parts of the appliance when removing or
re-installing the filter. It can result in the risk of personal injury.
• Do not block the air inlet or outlet of the appliance. Reduced air flow will result in poor
performance and could damage the unit.
• Always grasp the plug when plugging in or unplugging the appliance. Never unplug by pulling
on the cord. It can result in the risk of electrical shock and damage.
• Install the appliance on a sturdy, level floor capable of supporting up to 110lbs(50kg).
Installation on a weak or unlevel floor can result in the risk of property damage and personal
injury.
• Close all doors and windows to the room for most efficient operation.
This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It
must be plugged into a mating grounding type receptacle in accordance with the National Electrical
Code and applicable local codes and ordinances. If the circuit does not have a grounding type
receptacle, it is the responsibility and obligation of the customer to exchange the existing receptacle
in accordance with the National Electrical Code and applicable local codes and ordinances. The third
ground prong should not, under any circumstances, be cut or removed. Never use the cord, the plug
or the appliance when they show any sign of damage. Do not use your appliance with an extension
cord unless it has been checked and tested by a qualified electrical supplier. Improper connection of
the grounding plug can result in risk of fire, electric shock and/or injury to persons associated with
the appliance. Check with a qualified service representative if in doubt that the appliance is properly
grounded.
IMPORTANT - GROUNDING METHOD
