ACUM 110
EN
12
www.eberg.eu
CONSTRUCTION
ASSEMBLY
Handle
Touch control panel
LED display and
temperature display
Air inlet
Tower fan round base
Tapping Screws
1. First assemble the base by aligning the assembly poles with the corresponding holes, and
insert the poles into the holes.
2. Align the assembled base to the screw poles of the fan body.
3. Once connected, screw the base to the body using screws supplied. And put the power cord
into the slot of the base.
4. Stand the fan upright.
Position the Tower Fan on a flat and even surface where it will not cause obstruction or injury.
Connect the appliance to a suitable mains outlet. The Tower Fan will bleep and display the
current room temperature to indicate the appliance is operational.
Firstly, press the ON/OFF button to start. Once activated, you can then select your desired
function using the Control Panel or Remote Control as described on the previous page.
1
1
1
2
1
3
1
4
