EBENCH KH 910, Operating Instructions And Safety Advice

Page: 8 / 9

7
D
The alarm sound can be temporarily interrupted by pressing the SNOOZE button . After
approximately 9 minutes the alarm sound automatically switches itself on again. This process can be
repeated for a maximum of 1 hour 59 minutes. You can cut short the alarm period by setting the
FUNCTION SWITCH
to OFF.
AUTOMATIC 24 HOUR ALARM
After the alarm is switched off, if you set the FUNCTION SWITCH to AUTO again the alarm will
sound on the next day at the same time.
GOING TO SLEEP WITH THE SLEEP FUNCTION
This setting allows you to go to sleep whilst listening to the radio.With the FUNCTION SWITCH in
the AUTO or OFF position the radio plays for a maximum of 1 hour 59 minutes.
1 Press the Sleep button to set the time for which the radio will play. The display shows .
2 If you wish the radio to stop playing earlier just press and hold down the Sleep button whilst
pressing the MINUTES button until the desired playing time is displayed.
3 If you wish the playing time to be extended to 1:59, press and hold down the Sleep button
whilst pressing the HOURS button.
4 To switch off the Sleep function or to set the sleep time to press the SNOOZE button .
NOTE: Pressing the Sleep button again after setting the sleep time will automatically reset the
sleep time to . Press the SNOOZE button to switch off the Sleep function.
MAINS POWER FAILURE
To guard against losing your settings in the event of a mains power failure insert a 9-volt battery into
the battery compartment. The battery ensures that the radio alarm clock will function in emergency
mode even during a mains power failure. In these circumstances the LED display
will not be illumi-
nated. Once mains power is restored the correct time will be automatically displayed again.
Note: The alarm, radio and LED display do not function during battery operation.
0:59
0:00
0:59