21
EN
LOAD
LOAD
N
L
SENSOR
SENSOR
DO NO
T USE
230 V
3. Connect power, voltage 230 VAC,
load and floor sensor cable.
Any extension to the floor sensor ca-
ble must be by means of high-voltage
current. Protective conductor for
incoming feed and for heating cable
is connected with a connection clip in
the box. See wiring diagram below.
4. Insert the thermostat into the ap-
pliance box and screw tight with the
existing screws.
5. Read the
How the thermostat
works/Regulating functions
section on
how to set the regulating functions.
6. Mount frame, front and knob.
7. If the thermostat is mounted in
a multi-compartment frame, the
internal corners of this frame must be
removed.
