15
Can I r
Can I r
Can I r
Can I ride my
ide my
ide my
ide my EBCO
EBCO
EBCO
EBCO e
e
e
e----bike off
bike off
bike off
bike off----road?
road?
road?
road?
No. This EBCO e-bike is only suitable for normal trails as well as paved streets and bicycle paths.
It is not suitable for extreme terrain.
Can I ride my
Can I ride my
Can I ride my
Can I ride my EBCO
EBCO
EBCO
EBCO e
e
e
e----bike as a normal bike without motor support?
bike as a normal bike without motor support?
bike as a normal bike without motor support?
bike as a normal bike without motor support?
In “Off” mode you can ride your EBCO e-bike like any other regular bike.
Do I have to switch off my
Do I have to switch off my
Do I have to switch off my
Do I have to switch off my TranzX
TranzX
TranzX
TranzX PST Electric Drive System
PST Electric Drive System
PST Electric Drive System
PST Electric Drive System?
?
?
?
No. When you park the bicycle, it will automatically turn off after 3 minutes.
Do I need to tax my EBCO e
Do I need to tax my EBCO e
Do I need to tax my EBCO e
Do I need to tax my EBCO e----bike?
bike?
bike?
bike?
No, your EBCO e-bike is a regular bicycle, Road tax is therefore not required.
Do I have to wear a helmet?
Do I have to wear a helmet?
Do I have to wear a helmet?
Do I have to wear a helmet?
Some countries require that all bicycle riders wear a safety helmet. It is recommended that this precaution
be followed at all times for maximum safety protection, but otherwise it is not legally required.
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Motor support and pedalling are not in perfect synergy
Motor support and pedalling are not in perfect synergy
Motor support and pedalling are not in perfect synergy
Motor support and pedalling are not in perfect synergy
1.
Turn the system on and make sure the wheels stand in a straight line
on the ground. Press the background light button for approx. 6 seconds
until the display shows “CAL100/600”. The system has been reset.
2.
Check whether the disc magnets on the bottom bracket are close
enough to the RPM sensor (2-3mm) (Img. 8).
The display has no signal
The display has no signal
The display has no signal
The display has no signal
Check the fuse (Img. 9) and the power supply cable (Img. 10). Make sure the battery is functioning,
and not completely empty.
Img. 8
Img. 9
Img. 10
