EBARA JEU Operating Instructions, Installation & Maintenance Manual Download Page 3

Ebara

Fluid Handling

www.pumpsebara.com

3

(803) 327-5005  •  (803) 327-5097 

fax

rev. 01/12

Ebara Self Priming Jet Pumps

JEU

General Safety Warnings

FAILURE TO OBSERVE THESE WARNINGS AND/OR TAMPERING WITH
THE PUMP RELIEVES EBARA OF ANY RESPONSIBILITY IN THE EVENT
OF DAMAGE TO PERSONS OR OBJECTS AND/OR TO THE PUMP. 

before starting the pump it is important for the user to know how to perform all
the operations described in this manual and to apply them at all times during
use or maintenance of the pump. 

There are no rESIDUaL rISKS for JEU pumps.

No particular technical skills are required to use a JEU pump.

Preventative Measures to be Taken by The User 

The user must comply with all the accident prevention regulations in 
force in the country in which the pump is being used. The instructions 
provided in the Technical Data (page 4) must be followed exactly. 

During pump repairs or maintenance, remove the plug from 
the socket and/or turn off the switch (if provided), thus interrupting the 
supply of electric power to the pump. This will prevent accidental starting
which could cause damage to persons and/or objects. 

all maintenance operations, installations or shifting of the pump with the electric
system live may cause severe or fatal injury. During operation, avoid moving or
shifting the pump. 

before using the pump, always check that the cable and all the electric devices
are in working condition. 

Never start the pump (by inserting the plug in the socket and/or switching on
the switch) with bare feet, with your feet in the water, or with wet hands. 

JEU pumps are designed in such a way that all the moving parts are 
protected by the use of casings. Ebara declines all responsibility in 
the event of damage caused as a result of tampering with these devices.

Each lead or live part is electrically insulated to ground: there is also 
an additional safety device in that the accessible conductive parts are 
connected to a ground lead so that the parts within reach do not 
become electrically charged in the event of failure of the principal 
insulation. 

Summary of Contents for JEU













Reviews: