10
There are two cable entry points into the backbox of the touchscreen. If there is access for cable to be
routed into the back of the box, this is preferred. There is a hole as shown in “A” for the cable to feed
into the controller.
If the cable has to be routed from under the controller, see image “B”. Use the feature as a guide to drill
a hole. Ensure the hole diameter is large enough to feed the communication cable through.
Quantity
1
1
2
2
1
Purpose
Description
Connect MVHR unit to touch screen
Dependant on instillation.
Distance of routing between unit
and touch screen install point.
Pozi Screwdriver
Drill
Wall Plugs
Screws
6mm Drill Bit
4 Core Cable
(minimum 0.3mm
2
, screened)
Secure touch screen to wall
Secure touch screen to wall
Secure backbox to wall.
Optional drill hole in bottom of box
Secure PCB and screen
inside of backbox
Secure backbox to wall.
Optional drill hole in bottom of box
1
|
Route communication cable between unit and touchscreen
A
B
Unit Installation
2.0
2.7.1 Touchscreen Installation