5
Setting the controls
Turn the humidistat to the appropriate symbol on the dial. When drying is complete switch off the
dryer by turning the Humidistat to its lowest setting and unplugging the dryer from the mains.
When using for automatic humidity control initially turn to the highest setting, when signs of
excess moisture are reduced, gradually turn the humidistat dial anti-clockwise to the point where
the dryer just switches off. This level of humidity will now be maintained. If signs of excess moisture
re-appear, increase the humidistat setting slightly until the problems are again under control.
Humidistat
Mid humidistat setting for homes with general moisture levels
Control unwanted moisture wherever it occurs
Assists with indoor laundry drying
Dry rooms and plaster quickly and effectively
High humidistat setting for maximum extraction
Ensure internal doors are kept ajar where possible to allow air circulation.
Ensure external doors and windows are kept closed as much as possible.
1
2
Ensure the unit is positioned on a flat, even surface.
3
Getting the most from your Powerdri
Version 1
Turn the humidistat dial to the appropriate symbol on the fascia and the indicator light will show
amber. When drying is complete, switch off the dryer by turning the Humidistat to its lowest
setting and unplugging the dryer from the mains. When used for automatic humidity control,
initially turn clockwise to the highest setting and the indicator light will show amber, when signs
of excess moisture are reduced, gradually turn the humidistat dial anti-clockwise. As you turn
the dial anticlockwise each position sets a target relative humidity (RH) which is lower the
further it is turned, once the target RH is achieved the indicator light will turn green. This level of
humidity will now be maintained. If signs of excess moisture re-appear, increase the humidistat
setting slightly until the light turns amber. After adjusting the humidistat always allow 5 minutes
for the unit to start dehumidifying.
Humidistat
Setting
Version 2