6
•
Always keep focus on your helicopter, and do not attempt to fl y/land/or
crash anywhere on or near any other people or animals.
•
The rotating parts on the helicopter could lead to injury. Never put any
body part including the hands and face, close to the rotating parts. Only
operate this product standing, as it allows for quick movement away from
the helicopter if necessary.
•
Never operate the helicopter using parts that are altered in shape or
damaged in any form.
TROUBLESHOOTING
Problem
Cause
Correction
Helicopter is
not responding
to remote
Incorrect channel
selection on the
remote
Gently press forward on the left
joystick and switch between all 3
channels until the helicopter takes
fl ight. This is the correct channel.
Loss of Control
Interference of
another remote
controlled device
Interference by
other conditions
such as lighting
Avoid all other remote controlled
devices running on the same
channel.
Change environment to better
suited conditions.
Helicopter
Spinning out of
control
Incorrect trim
adjustment
Adjust the trim as shown above
to fi nd the proper adjustment.
Set the ON/OFF Switch to the ON
position.
Recharge the helicopter battery.
If this does not work, replace
the batteries in the remote and
recharge off fresh batteries.
Drops in
midfl ight
or performs
poorly
Weak battery
power
Recharge the helicopter battery.
If this does not work, replace
the batteries in the remote and
recharge off fresh batteries.
Propellers are not
moving
Helicopter is
powered off
Weak battery
power
XC6392IS01EXC.indd 6
XC6392IS01EXC.indd 6
8/8/11 2:29 PM
8/8/11 2:29 PM
