background image

FCC Part 15 Compliance

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.  Changes 
or modifi cations not expressly approved by the party responsible for compliance could void the 
user’s authority to operate the product.
Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the 
equipment off  and on, the user is encouraged to try to correct the interference by one or more of 
the following measures:
• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the transmitting equipment and receiver.

• 

Connect the equipment into an outlet on a circuit diff erent from that to which the receiver 
is connected.

• 

Consult the dealer or an experienced radio technician for help.

EB Excalibur, Inc.

Miami, Florida

www.EBExcalibur.com

[email protected]

Distributed in the United Kingdom by:

EB Brands UK, Worcester WR4 9FA

Actual product may diff er slightly from photography.

XC9977IS01EXC

WARNING

CHOKING HAZARD - Small Parts.
Not for children under 3 years.

 

XC9977IS01EXC.indd   8

XC9977IS01EXC.indd   8

8/24/11   2:43 PM

8/24/11   2:43 PM

Summary of Contents for Phantom Eagle XC9977









Reviews: