3
BATTERY INSTALLATION
This product requires the following batteries (not included):
9V battery - Remote
4 AA batteries - Vehicle
Remote Control:
Using a Phillips head screwdriver, remove the screw from the battery compartment
cover on the controller. Insert the battery, making sure to follow the polarity (+ and -)
marked on the product. Replace the battery compartment cover and secure in place.
Vehicle:
Push down on the tab on the battery
compartment cover and pull. Insert
2 AA batteries, making sure to follow
the polarity (+ and -) marked on the
product. Replace the battery cover,
making sure it is closed securely.
Repeat on the other side of the
vehicle.
TRIMMING VEHICLE
If you notice your vehicle drifting to the left or right when you try to drive in a straight line,
adjust the Trim Direction Control dial located on the bottom of the car by moving it left or
right.
HOW TO DRIVE
• POWER
-
Slide the ON/OFF switch in the center of the remote control to the ON posi-
tion. The red light will illuminate to indicate that the remote is operational. Slide the
ON/OFF switch on the bottom of the vehicle to the ON position.
•
FORWARD/BACK - Push the left controller joystick forward to move the car
forward. Push the left joystick back to move the car backwards.
•
LEFT/RIGHT - Push the right controller joystick control the right/left direction of the
vehicle.
• RANGE
-
The maximum operational distance is a radius of approximately 25 feet.
CARE & HANDLING
• Do not submerge in water or other liquids.
• Do not disassemble the product for any reason.
• Do not expose to extreme temperatures.
• Do not drop, throw, smash or otherwise cause physical shock.
• Clean using only a slightly damp cloth.
• Do not use cleaners with chemical agents.
• Do not short-circuit the battery terminals.
US5501IS01EXC.indd 3
US5501IS01EXC.indd 3
7/18/11 5:08 PM
7/18/11 5:08 PM
