Eazy RC ERC-1 Instructions Download Page 4

One-key Return to Home Instruction

NOTE

1. Every time when you power on the plane, it requires to activate the one-key U-turn function.

2. To use this function during 

ight, press the one-key return to home switch button

 the plane 

will turnaround automatically, back to the opposite direction where it takes o

. No matter you 

ies the plane under manual control or gyro assist mode, when you turn on the one-key return to 

home function, the plane will enter gyro assist mode automatically to help stable 

ying back.

3. To quit this function, just press again the switch button, or control any servo stick(rudder/ele

-

vator), the plane will back to your control immediately. When you quit this function, the plane will 
back to the what the control mode it was.

The one-key return to home function allows the plane to U-turn by the opposite direction that the 
plane takes off.

Follow below steps to activate the function.

1.Place your plane heading to the take-off direction.

2.Do NOT unlock the throttle

press the activation button and hold for several seconds until you 

hear  a"beep"sound,  the  rudder  surface  will  respond,  meaning  the  one-key  return  to  home 
function is now activated.

The one-key Rollover feature allows beginner 
pilot  to  perform  aerobatic  actions  by  simply 
pressing the button on transmitter.

During flight, under gyro control mode, press 

the one- key Rollover button, the transmitter 
will  beep  several  times.  During  the  beeping, 
simply  move  the  aileron  stick  to  either 
direction  for  auto-roll,  or  move  the  elevator 

stick to either direction for auto-flip.

One-key Rollover

One-key Rollover Instruction

CAUTION

This  function  is  bound  to  the 

receiver, instead of to the transmitter

 which 

means  the  plane  will  return  ONLY  to  the 
opposite direction that the plane takes off. In 
other words, this function can only make the 
aircraft 

y  in  the  opposite  direction  of  the 

setting,  and  cannot  be  used  as  a 

xed-point 

return.  It  is  not  based  on  the  position  at  the 
time of setting.

One-key U-turn
 Activation

One-key U-turn 
Switch

EN

Reviews: