EaZy BrandZ OberDome, User Manual

Page: 9 / 16

9
BEFORE FIRST USE
1. Make sure all labels, packaging and protective films have been
removed from the grill.
2. Remove manufacturing oils before cooking on this grill for the first time
by operating the grill for at least 15 minutes on “HIGH” setting with
element selector switched to center position-both elements on and the
lid closed. This will eliminate manufacturing odors.
OPERATING INSTRUCTIONS
1. The short cord is provided for safety.
2. An extension cord may be used with care.
3. If an extension cord is necessary:
• Use a UL-approved, 3-prong plug (grounded) that is rated for at
least 15 amperes and suitable for outdoor use.
• NEVER connect two or more extension cords together.
• Use the shortest extension cord possible.
• A 12- or 14-gauge cord of less than 50 feet is acceptable.
• Keep connections dry and off the ground.
• Avoid draping the grill cord over a countertop or tabletop where it
can be pulled on or tripped over.
NOTE:
This grill functions best without an extension cord.
1. Open lid.
2. Make sure there are no obstructions of airflow to the grill.
3. Make sure that temperature control assembly is turned fully to the
“OFF” position.
4. Plug the electrical cord connector into a dry GFI 3-prong outlet, per
“Grounding Instructions.”
5. Position Element Selector switch to center position (both top and
bottom elements are on).
TURNING ON
• Keep this appliance area clear and free from
combustible materials, gasoline and other flammable
vapors and liquids.
• DO NOT obstruct the flow of ventilation air.
CAUTION