14
第六步:平台调平
Step 6 - Platform Leveling
Place the nozzle setter on the center of
the printing platform. (The nozzle setter
needs to be removed after the nozzle is
triggered.)
将喷嘴设定器放置在打印平台中央位置。(
喷嘴触发后需要将喷嘴设定器移走。)
Before leveling, you need to ensure: the
distance between the nozzle and the
printing platform > 30mm.
调平前需要保证: 喷嘴与打印平台距离 >
30mm。
Click point1,2,3,4,5 in turn to perform
leveling.
依次点击point1,2,3,4,5,进行调平。
The nozzle will first move to the cen-
ter of the build platform, triggering
the nozzle adapter. Then the nozzle
moves to point1.
喷嘴会首先移动到打印平台中央,触发
喷嘴适配器。然后喷嘴移动到point1。
Turn on the power on the back of the
printer and click "Tool".
打开打印机背部电源,选择“Tool”。
When printing for the first time, level-
ing is required and select "Leveling".
首次打印,需要进行调平,选
择“Leveling”。
Adjust the four leveling nuts under the
printing platform to adjust the distance
between the nozzle and the platform to
0-0.1mm.
调节打印平台下方的四颗调平螺母,使喷嘴
与平台的距离调整为0-0.1mm。