EAW UXA Series, User Manual, Page: 40 / 54

Upon being prompted, choose the “Amplifier UXA4416” product from the list.
A name for this amplifier can also be entered here.
Click “OK” once complete.
The offline UXA4416 will be added to the model, showing up in the network view area and added to the
Project Explorer list.
There are two ways to Assign an online device to a network processor in the network configuration view.
The first method is to select and drag the Online Device then drop it into the network view area. This will
create a new UXA4416 processor and pull settings from the amplifier into Resolution.
The second method is to create an offline UXA4416 amplifier, with default settings, and assign an online
device to it. During assignment, the online and offline amplifiers settings are compared. If the settings
differ then a dialog is shown to prompt the user to either push settings to the online amplifier (reset to
defaults), or pull settings from the amplifier.
Adding an Online Device to Network Configuration View
Adding an Offline Amplifier
To add a UXA4416 to the system, click on the “+” symbol next to Processors & Amplifiers in the Project
Explorer window.