Acoustic Performance Partnership
Eastern Acoustic Works
LA215
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email [email protected]
AC
O
US
TIC
AL
PER
FORMANCE PA
RTN
ER
SH
IP
SPECIFICATIONS
LA215
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
The two-way full range loudspeaker systems shall incorpo-
rate a 15-in LF transducer and a 2-in exit/3-in voice coil
compression driver HF transducer.
The LF driver shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF driver shall be
loaded on an axis-symmetrical wave guide plate with a nomi-
nal coverage pattern of 90
°
(conical). An internal passive
filter network shall provide fourth order acoustical crossover
and system equalization.
System frequency response shall vary no more than
±
3 dB
from 69 Hz to 18 kHz measured on axis. The loudspeaker
shall produce a Sound Pressure Level (SPL) of 97 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 130.8 SPL on axis at
1 meter. The loudspeaker shall handle 600 Watts of amplifier
power (AES Standard) and shall have a nominal impedance
of 8 Ohms.
The loudspeaker enclosure shall be irregularly pentagonal in
shape. Rubber footpads shall be provided on one side and
one end. It shall be constructed of 1/2-in thickness void-
free cross-grain-laminated Baltic birch plywood and shall
employ extensive internal bracing. It shall be finished in
black catalyzed polyurethane. Input connectors shall be dual
Neutrik NL4 Speakon. The following mounting/suspension
hardware shall be provided: three 3-position flytracks with
integral 3/8"-16 threaded mounting points (2 top, 1 rear),
six 3/8"-16 threaded mounting points (1 top, 1 rear, 2 each
on two sides) and a recessed cup to accept a standmount
pole. The front of the loudspeaker shall be covered with a
vinyl coated perforated steel grille.
The two-way full range loudspeaker shall be the EAW model
LA215.
BACK
RIGHT SIDE
2.25
9.50
(6.25)
5.08
(14.16)
5.81
4.50
18.50
(14.56)
5.50
25.63
12.98
6.75
3.00
TOP
35
°
20
°
6.75
(18.42)
FRONT
LEFT SIDE
BOTTOM
"TOP HAT"
POLE SOCKET
14.88
(21.23)
19.50
8.78
2.06
29.75
30.00
16.25
10.13
27.69
6.38
2.80
35
°
LA215
510183 EXP 4/1/97 SHB
MOUNTING POINT, 3/8"-16 THREADED HOLE
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED.
CABINET SYMETRICAL ABOUT ITS CENTERLINES.
CENTER OF GRAVITY.
RUBBER FOOT.
