SPECIFICATIONS KF760
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
Dimensions
inches
millimeters
Front Height
14.5
368
Rear Height
12.9
327
Width
45.0
1143
Depth
31.0
787
Trapezoid Angle
1.5 degrees top & bottom
Weights
pounds
kilograms
Net Weight
241
109.3
Shipping Weight
251
113.9
SYMBOL INDICATES CENTER OF BALANCE.
FRONT
C
L
14.50
2X .18 X 24.00
RUNNERS
3X GRILLES
PARTIALLY SHOWN
45.00
43.00
BACK
INPUT
C
L
6.62
10.00
HANDLE
7.00
.85
3.62
.66
TOP
DIMENSIONS APPLY TO
TOP AND BOTTOM
1.25
C
L
1.50
2X STACK
PAD
POCKET
4X EAW
PROPIETARY
RIGGING
SYSTEM
31.00
24.50
17.00
ACCESS
PANEL
TOP ONLY
7.88
4
H
3°
RIGHT SIDE
DIMENSIONS APPLY TO
BOTH SIDES
7.88
4X
HANDLES
C
L
6.96
12.88
8.61
3°
14.50
29.75
4X .875 SQ
509120 (0)
6/28/01
The tri-amplified, three-way full range loudspeaker system
shall incorporate 2x 12-in LF transducers, 2x 10-in horn-
loaded cone transducers with Radial Phase Plug™ and 2x 2-in
exit/3-in voice coil compression drivers also horn-loaded.
The LF transducers shall each be loaded into a proprietary
bent-horn, with the horn mouths horizontally separated to
provide controlled off-axis cancellations to match the MF
beamwidth through the crossover region. The MF transducers
shall both be coupled into a single large format horn. The HF
transducers shall each be coupled to an HF horn coaxially
mounted with, and extended by, the MF horn. The system
shall have a nominal dispersion pattern of 80° (h) when used
as part of a KF760 line array.
System frequency response shall vary no more than ±3 dB from
80Hz to 16kHz measured on axis. The single loudspeaker’s
subsystems (LF/MF/HF) shall produce Sound Pressure Level
(SPL) of 96/108/113 dB SPL on axis at 1 meter with a power
input of 1 Watt, and shall be capable of producing a peak out-
put of 135/142/144 dB SPL on axis at 1 meter. The eight (8)
enclosure array loudspeaker subsystems (LF/MF/HF) shall pro-
duce SPL of 106/125/117 dB SPl on axis at 1 meter with a
power of 1 Watt, and shall be capable of a peak output of
154/169/156 dB SPL on axis at 1 meter. The subsystems
(LF/MF/HF) shall handle 2000/800/300 Watts of amplifier
power (continuous) and shall have nominal impedances of 2x
8/8/8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of void-free cross-grain-laminated Baltic
birch plywood, and shall employ extensive internal bracing. It
shall be finished in wear-resistant textured black paint. Input
connector shall be a Neutrik NL8 with an additional NL8 pro-
vided for connect through. Proprietary rigging is provided for
arraying. The front of the loudspeaker shall be covered with a
powder coated perforated steel grille.
The tri-amplified, three-way full range loudspeaker system
shall be the EAW model KF760.
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
KF760/0002962/2 pp
April 2002
Printed in USA
3°
Manufacturing tolerances are +/- 0.13 and +/- 1°
PHYSICAL continued
ACCESS
PANEL
TOP AND
BOTTOM
