background image

 

Part No. 0009777  Rev. D  05/07

DX

810

8X10 DIGITAL MIXER AND SIGNAL PROCESSOR

Eastern Acoustic Works   |   One Main Street   |   Whitinsville, MA  01588  USA   |   TEL toll free within US/Canada 888.337.7404 

TEL outside US 425.892.6503   |   FAX 425.485.1152  |  

Page 5 of 5

CSI PRODUCT SPECIFICATIONS FOR DESIGNERS, SPECIFIERS, AND CONSULTANTS 

(Also known as “A&E Specifications”)
The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures” 
and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification.

PART 2 PRODUCTS

2.01 

Approved Manufacturer/Product

 

A.  EAW Commercial, One Main Street, Whitinsville, MA  01588  USA

 

B.  Model number: 

DX810

2.02 

Design

 

A.  Configuration: 

8-channel digital audio mixer

 

 

1.  Inputs:

 

 

 

a.  Eight balanced mono mic inputs (Eight 3-pin Phoenix-type connectors)

 

 

 

b.  Ten balanced mono line inputs (Ten 3-pin Phoenix-type connectors)

 

 

2.   Outputs:

 

 

 

a.  Ten balanced line outputs (Two 3-pin and two 12-pin Phoenix-type connectors)

 

 

 

b.  Eight unbalanced direct line outputs (one DB15 connector)

 

 

 

c.  Two unbalanced RECORD outputs (two RCA line-level output jacks)

 

 

3.   Other

 

 

 

a.  Ten logic inputs and ten logic outputs (one DB25 connector)

 

 

 

b.  One remote bus connector (one 3-pin Phoenix-type connector)

 

 

 

c.  Two RS-232C serial ports (two DB9 connectors)

 

B.  Powering Mode

 

 

1.   Internal AC power supply, 90 - 240 VAC, 50/60 Hz, 1 A

 

 

2.   External DC power supply, 22 - 28 VDC, 3 A

2.03 

Electrical Properties

 

A.  Frequency Response (± 0.5 dB):

 

 

 

 

20 Hz to 20 kHz

 

B.  Total Harmonic Distortion (20 Hz to 20 kHz @ 0 dBu output):

 

 

 

 

< 0.005%

 

C.  Noise (20 Hz to 20 kHz BW, 150 ohm source impedance):

 

 

1.  Equivalent Input Noise (EIN):

 

 

 

 

–129.5 dBm unweighted

 

 

2.  Output Noise

 

 

 

a.  Master level at unity, channel levels at unity:

 

 

 

 

–82 dBu

 

 

 

b.  Single channel to Master out:

 

 

 

 

–100 dBu

 

D.  Common Mode Rejection (@ 1 kHz, Gain at maximum):

 

 

 

 

80 dB

 

E.  Crosstalk (@ 1 kHz, any input to adjacent direct output):

 

 

 

 

–90 dB

 

F. 

Input Gain Control Range:

 

 

1.  Mic In: 

0 dB to +60 dB

 

 

2.  Line In: 

–30 dB to +30 dB

 

G.  Phantom Power:  

+48 VDC @ 7 mA per input channel

 

H.  Rated Output: 

 

 

 

 

1.  Nominal Output:      +4 dBu

 

 

2.  Maximum Output: +18 dBu

2.04 

Physical Properties

 

A.  Dimensions

 

 

1.  Height: 

3.5 in/89 mm

 

 

2.  Width: 

19 in/483 mm

 

 

3.  Depth: 

13.25 in/337 mm

 

B.  Weight

 

 

1.  Net Weight: 

12.9 lb/5.9 kg

Reviews: